[error loading /home/brad/classic/public_html/include/track.nws]{NEOWEBSCRIPT ERROR: SAFE_load_virtual: unable to load '../include/track.nws' from '/home/brad/classic/public_html/sis/rect_bilevel_5850_5851.htm'
can't read "record1()": no such element in array
while executing
"lindex $record1($lastvisit) 2"
(procedure "neotrack" line 72)
invoked from within
"neotrack"
("uplevel" body line 1)
invoked from within
"uplevel $args"
(procedure "slave_unknown" line 4)
invoked from within
"neotrack"
invoked from within
"if {![info exists doNotTrack]} {
if {![info exists trackHasBeenLoaded]} {
set trackHasBeenLoaded 1
if {[info exists webenv(REMOTE_ADDR)]..."}
SAFE_load_virtual: unable to load '../include/track.nws' from '/home/brad/classic/public_html/sis/rect_bilevel_5850_5851.htm'{NEOWEBSCRIPT ERROR: can't read "thisIsANewVisitor": no such variable}can't read "record1()": no such element in array while executing "lindex $record1($lastvisit) 2" (procedure "neotrack" line 72) invoked from within "neotrack" ("uplevel" body line 1) invoked from within "uplevel $args" (procedure "slave_unknown" line 4) invoked from within "neotrack" invoked from within "if {![info exists doNotTrack]} { if {![info exists trackHasBeenLoaded]} { set trackHasBeenLoaded 1 if {[info exists webenv(REMOTE_ADDR)]..."invoked from within "load_virtual $home/include/track.nws" invoked from within "$safeInterp eval $ssiCode"
can't read "thisIsANewVisitor": no such variable
while executing
"html "
|
|
BILEVEL SURFACES Duplex 36" & 48" Rectilinear Tables | |
![]() | ![]() |
The Duplex tables offer the same crank height worm gear mechanism as the Generation IV series as well as the steel frame construction. The difference is in the keyboard surface which is mounted on a counter balanced spring loaded arm assembly attached under the VDT surface and follows the height adjustment made to the VDT surface. A finger trigger control under the keyboard surface adjusts the keyboard surface separately from the VDT for an ergonomic differential from 7" above the VDT surface to 5.5" below. Table can be upgraded by adding a motor to table frame. Use as a stand-alone or workstation configuration. |
|
Bilevel Surfaces | Single Surfaces Infills and Side Surfaces SIS Workstations Contents |
[ HOME ]
| Page Modified Sat Dec 08 16:58:12 MST 2018 |