All Generation IV Crank Tables can be either ordered or upgraded with electric height adjustment controls! The motor comes with everything required to install and operate. NO ELECTRICIAN REQUIRED!

Motor Specifications:
• Speed: .75" per second in either direction with a 150 lb static load per surface
• Cord length: 7.5'
• Plug: 3 prong grounded
• External housing: Plastic
• Electric components: All UL listed
• Two motors for bilevel tables. One motor for single surface or duplex tables
• Electric motors are specially wrapped and insulated to avoid electromagnetic fields which can interfere with the transmission of data
• Motor is fused with an auto reset; approximately 15 minute reset time
• Toggle switch operation with high and low-end cut off
• Not recommended for use on Corner Bilevel 5804, 5810, 5121, and 5122 keyboard surfaces
• Decibel level conforms to OSHA requirements for office environment

Installation: Motor simply inserts into the Power Exchange Outlet (PXO) where it engages the chain of your crank table. With the included allen wrench, insert one bolt to lock into position, extend the toggle switch to the desired usage position and affix, then run the power cord down the leg cable management channel to the wall outlet. Job complete!

Quantity: