Stylex Seating Controls  NORMAL VIEW

17 Front Pivot Knee Tilt
Adjustments: Pneumatic seat height. Adjustable tension for swivel tilt, heavy duty spring, minimal front rise. Tilt lock out. Two position front stop. Application: Fixed back swivel tilt chair where minimal rise of front seat edge is desired.	Features: Advanced forward pivot function with 7" pivot to cylinder centerline to reduce seat rise under legs. Compact, low profile design to maximize adjusting range. Patented, high performance conical spring provides wide spectrum of adjustability while maintaining even support throughout entire travel range. Nylon bearings give smooth, maintenance-free ride. Safety shield address pinch-point concerns. Forward and rear cushioned stops provide quiet, dampened tilting action. Two-position front tilt stop range: 0o at rest to 20o for 20o overall travel, or 5o at rest to 20o for 15o overall travel. Tilt lock at 2o forward and 3o rearward is standard on this control. Positive locking of back height adjustment from seated position. Gas lift cylinder with large 17-4 top taper.
"" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 65 Ergo Task Adjustments: Pneumatic seat height. Adjustable back height. Adjustable back and seat angle with infinite lock. Application: Task chairs where both back angle and seat angle adjustments are controlled by a single paddle and made simultaneously. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 6o forward to 5o rearward. Back travel of 14o forward and 15o backward. Back angle adjustment and seat angle adjustment are easily accomplished by using a single paddle. Life paddle and back and seat are free to move to desired position. Release paddle to lock. Positive locking of back height adjustment from seated position. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 66 Advanced Ergo Task Adjustments: Pneumatic seat height. Adjustable back height. Adjustable back angle with infinite lock. Adjustable seat angle with infinite lock. Application: Task chairs where both back angle and seat angle adjustments are controlled by separate paddles and made individually. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 5o forward to 7o rearward. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position release paddle to lock. Back travel of 8o forward and 13o backward. Once the paddle is in lock position, back is fixed. Positive locking of back height adjustment from seated position. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 69/68 Multi-Task with Swivel Tilt Mode Adjustments: Pneumatic seat height. Adjustable back height. Adjustable back angle with infinite lock. Note: Specify 68 control for free float back angle. Adjustable seat angle with infinite lock. Adjustable tension for free floating seat. Seat angle forward tilt lock out. Application: To satisfy the requirement for a full function advanced task chair and a fully adjustable swivel tilt chair in one seating unit. The 68 control also offers the added feature of a free floating back. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 7o forward to 17o rearward tilt action. Swivel tilt mode is engaged by putting seat into free float. The following features enhance the swivel tilt mode: __Torsion spring tension adjustment for articulating seat movement. __Forward tilt stop lever. __Infinite tilt lock through entire range of seat movement. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position - push paddle down to lock. Back travel of 6o forward and 12o backward. Once the paddle is in lock position, back is fixed. Positive locking of back height adjustment from seated position. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 75 Multi-Task with Internal Back Height Adjustment 75 is like 65 respectively, but has an internal mechanism for adjusting back height rather than a knob to loosen. Adjustments: Pneumatic seat height. Internal back height adjustment. Adjustable back and seat angle with infinite lock. Application: Task chairs where both back angle and seat angle adjustments are controlled by a single paddle and made simultaneously. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 6o forward to 5o rearward. Back travel of 14o forward and 15o backward. Back angle adjustment and seat angle adjustment are easily accomplished by using a single paddle. Life paddle and back and seat are free to move to desired position. Release paddle to lock. Ease of use drop and lift internal back height with a five stop 2-1/2" adjustment range. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 76 Advanced Ergo Task with Internal Back Height Adjustment 76 is like 66 respectively, but has an internal mechanism for adjusting back height rather than a knob to loosen. Adjustments: Pneumatic seat height. Internal back height adjustment. Adjustable back angle with infinite lock. Adjustable seat angle with infinite lock. Application: Task chairs where both back angle and seat angle adjustments are controlled by separate paddles and made individually. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 5o forward to 7o rearward. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position release paddle to lock. Back travel of 8o forward and 13o backward. Once the paddle is in lock position, back is fixed. Positive locking of back height adjustment from seated position. Ease of use drop and lift internal back height with a five stop 2-1/2" adjustment range. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 79/78 Multi-Task with Swivel Tilt Mode and Internal Back Height Adjustment Adjustments: Pneumatic seat height. Internal back height adjustment. Adjustable back angle with infinite lock. Note: Specify 78 control for free float back angle (78 has all of 79's options with additional option of free floating back with infinite lock). Adjustable seat angle with infinite lock or free float. Adjustable tension for free floating seat. Seat angle forward tilt lock out. Application: To satisfy the requirement for a full function advanced task chair and a fully adjustable swivel tilt chair in one seating unit. The 78 control also offers the added feature of a free floating back. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 5o forward to 17o rearward tilt action. Paddle adjustment for free float or tilt action. Swivel tilt mode is engaged by putting seat into free float. The following features enhance the swivel tilt mode: __Torsion spring tension adjustment for articulating seat movement. __Forward tilt stop lever. __Infinite tilt lock through entire range of seat movement. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position - push paddle down to lock. Back travel of 7o forward and 10o backward. Once the paddle is in lock position, back is fixed. Ease of use drop and lift internal back height with a five stop 2-1/2" adjustment range. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 81 Synchro-Task with Back Angle and Internal Back Height Adjustment Adjustments: Pneumatic seat height. Internal back height adjustment. Adjustable synchro tilt movement with infinite lock or free float. Adjustable tension for synchro tilt movement. Application: To satisfy the requirement for a synchro tilt chair with an adjustable back angle. 81 has all features of #79, but with synchro tilt vs. free float, synchro tilt actually enhances spinal motion while rocking. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 3o forward to 7o rearward tilt action. Paddle adjustment for free float or tilt lock. Synchro tilt mode is engaged by putting seat into free float. The following features enhance the synchro tilt mode: __Torsion spring tension adjustment for articulating seat movement. __Infinite tilt lock through entire range of seat movement. Back travel of 12o forward and 7o backward. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position - push paddle down to lock. Once the paddle is in lock position, back is fixed. Ease of use drop and lift internal back height with a five stop 2-1/2" adjustment range. Gas lift cylinder with large 17-4 top taper. Optional seat slide available (SS). "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " 83 Knee Tilt with Back Angle and Internal Back Height Adjustment Adjustments: Pneumatic seat height. Internal back height adjustment. Front stop lock out. Multiple position knee tilt lock out. Adjustable tension for knee tilt, heavy duty spring, minimal front rise. Adjustable back angle with infinite lock. Application: To satisfy the requirement for a full function advanced task chair and a fully adjustable Knee tilt chair in one seating unit. Features: Low profile design. Nylon bearings at all pivot points. Articulating seat movement of 6o forward to 18o rearward tilt action. Paddle adjustment for free float or tilt lock. Knee tilt mode is engaged by putting seat into free float. The following features enhance the synchro tilt mode: __Torsion spring tension adjustment for articulating seat movement. __Forward tilt stop lever. __Infinite tilt lock through entire range of seat movement. Automatic angle adjustment of back. Lift paddle, and back is free to move to desired position - push paddle down to lock. Back travel of 8o forward and 10o backward. Once the paddle is in lock position, back is fixed. Ease of use drop and lift internal back height with a five stop 2-1/2" adjustment range. Gas lift cylinder with large 17-4 top taper. "" invoked from within "$safeInterp eval $ssiCode" {NEOWEBSCRIPT ERROR: can't read "backLab": no such variable} can't read "backLab": no such variable while executing "html " SS Seat Slide Adjustments: Adjustable seat depth. Note: This is an optional accessory. It is attached only to the controls which are noted above. Application: This is a convenience option which can be used on task chairs where seat depth adjustments are necessary to accommodate a variety of body sizes. Features: Low profile design. Precision formed and lubricated tracks. Forward and backward adjustment of 2-1/2" to increase or decrease the depth of the seat. Positive locking of seat depth adjustment with a spring loaded pull out lever. Five adjustment stops for accurate positioning. BACK to Main Stylex Page [ HOME ][ Sitemap ] Page Modified Mon Jul 14 17:46:03 CDT 2008   Implementation Copyrights © 2010 by hav.Software - All Rights Reserved Contents Funded and Copyright © 1994-2010 by Back Be Nimble -All Rights Reserved.  RSS - Back Pain Solutions - Share and Ask the Doctor classic.backbenimble.com Back Store provides information and self-care products addressing ergonomics, postural support and back pain relief. Offerings should not be considered medical advice or substitutes for recommendations of an attending doctor, nor as specific endorsement of any treatment, massager, neck pillow, book holder stand, orthopedic support, memory foam mattress or adjustable bed. Welcome to the CLASSIC Back Be Nimble website Products that are oldies but goodies continue to be available on our classic blue and golden site - but our most popular products are now presented on our newly designed website. You may shop either or both sites at the same time. All links, search results and product lists will seamlessly navigate to the classic or the new site during your visit with us. And both sites checkout on the same secure BackBeNimble server. CONTINUE TO YOUR PAGE NOW NEW BackBeNimble.com CLASSIC BackBeNimble.com